The smallest range from AJ Power, the 3 Series, offers reliable power in an ultra compact solution. The 3 Series is powered by the world renowned Perkins engines and offers optimum fuel consumption. A range of options are available to tailor your generating set to meet your needs, including optional canopy offering low noise level - perfect for urban locations.
SECTORS SERVED INCLUDE:
Telecommunications, Construction, Residential and Retail.
|50 Hz||1500||10 - 110 kVA|
|60 Hz||1800||30 - 105kW|
|50 Hz||1500||10 - 22 kVA|
|60 Hz||1800||10 - 20 kW|
To ensure world-class quality our engines are all manufactured in the United Kingdom, Europe, United States of America or Japan
All our alternators are UK sourced.
All the radiators that we use in our generating sets are European manufactured.
Water contamination in fuel is separated out with the fuel/water separator.
Heavy duty battery cables.
Full functional manual pack supplied with all generating sets.
Complete with power loom and Busbar connection point. (Not standard on 9 Series)
Removes contaminants in the air prior to entering the engine.
Voltage sensing via one phase.
Allows you to quickly stop the generating set in case of an emergency. Pressing the emergency stop button causes the generating set to shut down immediately.
Standard 30% antifreeze supplied with all generating sets. Upgade for colder ambients available as an option.
Minimises disturbances on the generators output from interference caused by non-linear loads. Also known as RFI.
Basic automatic control panel with simple to use controls and numerical displays.
Improved protection against moisture ingress.
This is a self contained fuel tank in base frame of generating set.
Visual fuel level to help monitor fuel.
Fitted as standard on open generating sets.
Automatic control panel with electronic engine support as well as expansion and remote communication capabilities.
Insight 4100 Digital Automatic Control Panel
Insight 3300 Remote Display Panel (loose)
Insight 4100 Remote Display Panel (loose)
Remote communications plug-in module for Insight3300/4100 - Ethernet interface
Remote communications plug-in module for Insight3300/4100 - GSM/GPRS Wireless Remote Monitoring with antenna
Remote communications plug-in module for Insight3300/4100 - to support RS232 and RS485 Modbus RTU interfaces
To provide automatic control of your standby generating set in the event of a power outage. Available from 40A - 4000Amp.
Fully galvanised steel enclosure delivering durability and security for your generating set.
Accurately controls the engine speed. Recommended for synchronising. Standard on some models - Refer to factory.
Used to program or monitor the Woodward L series governor.
Helps the engine to start in cold weather.
Allows removal of lubricant during service or maintenance.
Assists in the removal of lubricant during service or maintenance.
Appropriate when the generating set is to be sited in a low ambient and /or high humidity environment. The heater maintains the air around the windings at a suitable temperature to prevent winding corrosion due to condensation.
Used to adjust setting on MeccAlte automatic voltage regulator.
This is the ultimate solution to be used when the application or the environment is abusing the insulation of the generating set. Also includes an over-coating of all the rotating active components.
Coolant solution for ambients down to -36degC. 50% antifreeze.
Automatic high coolant temperature alarm at pre-set temperature level. Available with InSight4000/6000 only.
Secondary containment of fuel for leakage prevention.
Integral single skinned tank. (600, 1000, 1300 litres - canopied only)
Eye hook fitted to top centre of canopy. Provides means of lifting generating set and is useful during installation. Available with canopied models only.
Required for mobile generator applications.
Automatic alarm for approaching low fuel level.
Visual fuel level % display on controller. Not available with InSight3000.
Gives fuel level indication at 4 set levels.
3 way dual valve with single lever operation. Complete with single lever operation. This should be used for remote fuel connection selection instead of basetank. Manual changeover between two fuel sources to the engine.
Essential kit for mounting an industrial silencer during installation. This kit is supplied loose and includes 2 x cuffed elbows, 2 x support brackets, 6 x clamps and 1 x rain cap.
Provides additional exhaust noise reduction. Supplied loose. (Standard on all canopied sets)
Essential kit for mounting a residential silencer during installation. This kit is supplied loose and includes 2 x cuffed elbows, 2 x support brackets, 6 x clamps and 1 x rain cap.
Provides flexible connection between engine and exhaust. Supplied loose.
This is an upgrade from the standard 3 pole circuit breaker. The neutral connection is broken as well as L1, L2 and L3. (3 phase only)
Provides the controller with an indication on the current circuit breaker position.
This is a ready to use socket supplied with the generating set. Equipment can be easily connected.
A lever is placed directly after the battery which is used to isolate the batteries from the machine
Keeps the genset starting batteries full of charge when the machine is not running. Includes BC failure. 5A 220/240 Volt
Keeps the genset starting batteries full of charge when the machine is not running. Includes BC failure and boost. 220/240 Volt
Increased sound attenuation with container option. Bespoke containers available throughout the range.
Basic maintenance tools.
Adds additional protection to genset during shipping.
Additional guarding on exhaust manafolds. Certificate of compliance.
Certificate of compliance.
Additional operator manuals for workshop/service personnel.
Interested in this product? Get in touchMake an enquiry