Navigation
After Sales

7 Series

From whatever angle you look at it, there is no denying the high standards and attention to detail that have been applied to the design of the entire 7 Series range.

Ready to meet the demands of your industry, the 7 Series boasts an array of standard features plus a complete range of additional options.

The 7 Series range is powered by Scania and Perkins engines. These engines offer high performance cooling systems, high uptime, low operational costs and long service internals - delivering power you can depend on.

SECTORS SERVED INCLUDE:
Industrial, construction, mining, commercial, events and utilities.

Check out our Youtube Channel   or   View our brochure

Product Finder

Use the filters below to find the product that best fits your needs

Refine
Reset

7 Series

275-938 kVA

Fuel Optimised Non Emissions Compliant

AJ330

Model AJ330
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 300
Standby kVA 330
Engine Scania
Model DC9 72A

AJ615

Model AJ615
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 560
Standby kVA 615
Engine Scania
Model DC16 093A-52

AJ375

Model AJ375
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 387.5
Standby kVA 437.5
Engine Scania
Model DC13 072A

AJ360

Model AJ360
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 330
Standby kVA 360
Engine Scania
Model DC9 72A 02-14

AJ670

Model AJ670
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 610
Standby kVA 670
Engine Scania
Model DC16 093A 02-53

AJ400

Model AJ400
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 412.5
Standby kVA 462.5
Engine Scania
Model DC13 072A

AJ375

Model AJ375
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 350
Standby kVA 375
Engine Scania
Model DC13 72A

AJ710

Model AJ710
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 650
Standby kVA 710
Engine Scania
Model DC16 093A 02-54

AJ440

Model AJ440
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 431.25
Standby kVA 500
Engine Scania
Model DC13 072A

AJ710

Model AJ710
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 661.25
Standby kVA 730
Engine Scania
Model DC16 093A 02-54

AJ400

Model AJ400
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 370
Standby kVA 400
Engine Scania
Model DC13 72A

AJ770

Model AJ770
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 700
Standby kVA 770
Engine Scania
Model DC16 78A

AJ460

Model AJ460
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 450
Standby kVA 512.35
Engine Scania
Model DC13. 072A

AJ670

Model AJ670
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 608.75
Standby kVA 671.25
Engine Scania
Model DC16 093A 02-52

AJ440

Model AJ440
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 400
Standby kVA 440
Engine Scania
Model DC13 72A

AJ280

Model AJ280
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 281.25
Standby kVA 312.5
Engine Scania
Model DC9 072A

AJ500

Model AJ500
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 500
Standby kVA 556.25
Engine Scania
Model DC13 072A

AJ460

Model AJ460
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 410
Standby kVA 460
Engine Scania
Model DC13 72A

AJ310

Model AJ310
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 306.25
Standby kVA 343.75
Engine Scania
Model DC9 072A 02-12

AJ615

Model AJ615
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 550
Standby kVA 606.25
Engine Scania
Model DC16 093 02-52

AJ280

Model AJ280
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 250
Standby kVA 280
Engine Scania
Model DC9 72A

AJ500

Model AJ500
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 450
Standby kVA 500
Engine Scania
Model DC13 72A

AJ330

Model AJ330
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 325
Standby kVA 368.75
Engine Scania
Model DC9 072A

AJ770

Model AJ770
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 700
Standby kVA 770
Engine Scania
Model DC16 78A

AJ310

Model AJ310
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 280
Standby kVA 310
Engine Scania
Model DC9 72A 02-12

AJ550

Model AJ550
Frequency 50 Hz
Phase
T Three Phase
R.P.M 1500
P.R.P kVA 500
Standby kVA 550
Engine Scania
Model DC13 72A

AJ360

Model AJ360
Frequency 60 Hz
Phase
T Three Phase
R.P.M 1800
P.R.P kVA 362.5
Standby kVA 412.5
Engine Scania
Model DC9 072A

Standard Features

    • Engine

      To ensure world-class quality our engines are all manufactured in the United Kingdom, Europe, United States of America or Japan.

    • 
    Engine

    • Alternator

      All our alternators are UK sourced.

    • 
    Alternator

    • Radiator

      All the radiators that we use in our generating sets are European manufactured.

    • 
    Radiator

    • Water Separator

      Water contamination in fuel is separated out with the fuel/water separator

    • 
    Water Separator

    • Battery Cables

      Heavy duty battery cables.

    • 
    Battery Cables

    • Manual Pack

      Full functional manual pack supplied with all generating sets.

    • 
    Manual Pack

    • Circuit Breaker

      Complete with power loom and Busbar connection point.

    • 
    Circuit Breaker

    • Medium Duty Air Cleaner

      Removes contaminants in the air prior to entering the engine.

    • 
    Medium Duty Air Cleaner

    • 1 Phase AVR Sensing

      Voltage sensing via one phase.

    • 
    1 Phase AVR Sensing

    • Emergency Stop Push Button

      Allows you to quickly stop the generating set in case of an emergency. Pressing the emeergency stop button causes the generating set to shut down immediately.

    • 
    Emergency Stop Push Button

    • Coolant Solution

      Standard 30% antifreeze supplied with all generating sets. Upgade for colder ambients available as an option.

    • 
    Coolant Solution

    • Radio Frequency Interference Suppression Kit (AR6)

      Minimises disturbances on the generators output from interference caused by non-linear loads. Also known as RFI.

    • 
    Radio Frequency Interference Suppression Kit

    • Industrial Silencer

      Industrial Silencer is standard on all open sets.

    • 
    Industrial Silencer

    • Battery

    • 
    Battery

    • InSight3100 Control Panel (PN31)

      Automatic control panel with electronic engine support as well as expansion and remote communication capabilities

    • 
    InSight3100 Control Panel

    • Coolant Drain (WV1)

      Allows easy drainage of coolant during service or maintenance. Standard on canopied version only.

    • 
    Coolant Drain

    • Lube Oil Drain (LV1)

      Allows removal of lubricant during service or maintenance.

    • 
    Lube Oil Drain

    • Base tank

      This is a self contained fuel tank in base frame of generating set.

    • 
    Base tank

Optional Features

Control System

    • InSight3330 Control Panel (PN31)

      InSight3300 Digital Automatic Control Panel

    • 
    InSight3330 Control Panel

    • InSight4100 Control Panel (PN41)

      InSight4100 Digital Automatic Control Pane

    • 
    InSight4100 Control Panel

    • Control Panel Heater (CPH1)

      Recommended for generating sets working in cold, arduous conditions.

    • 
    Control Panel Heater

    • InSight5200 Auto Synchronising (PN52)

      InSight5200 Auto Synchronising

    • 
    InSight5200 Auto Synchronising

    • InSight6000S Auto Synchronising (PN62S/63S)

      InSight6000S Auto Synchronising With Other Generating Sets (Woodward Easygen 3200 XT) * (AR2 required with Newage alt only) (includes AR5 )

    • 
    InSight6000S Auto Synchronising

    • LS5 Panel (LS5 -2CB)

      The LS-5 is a synchronising and load sharing controller to be used in conjunction with InSight6000. The LS-5 is designed to enable complex power management applications with multiple incoming mains and bus breakers. Supplied loose.

    • 
    LS5 Panel

    • Parallel Operation Loss of Mains Protection Relay Panel (LMP - G99)

      Parallel Operation Loss of Mains Protection Relay Panel (G99) short term paralleling only.

    • 
    Parallel Operation Loss of Mains Protection Relay Panel

    • Parallel Operation Loss of Mains Protection Relay Panel (LMP-G10)

      Parallel Operation Loss of Mains Protection Relay Panel (G10)

    • 
    Parallel Operation Loss of Mains Protection Relay Panel

    • Remote Display Panel (RP33M/ RP41M/ RO52/RP62SS)

      Remotely control and monitor the generator with a separate remote panel identical to the one fitted on the genset.

    • 
    Remote Display Panel

Control Functions

    • Exercise Timer (AGE1)

      Starts and stops the genset at a predefined time each week. (Not available on InSight3200)

    • 
    Exercise Timer

    • Expansion Card (EXC)

      Provides the controller with 8 additional contacts which can be used as either inputs or outputs.

    • 
    Expansion Card

    • Expansion Kit (EXK)

      Provides the controller with 8 additional inputs and 8 additional outputs.

    • 
    Expansion Kit

    • Adjust Voltage through Control Panel (VA1)

      Raise or lower the voltage from the controller/control panel.

    • 
    Adjust Voltage through Control Panel

Communications

    • Volt Free Contacts (VF3/4)

      Programmable contacts for your required outputs.

    • 
    Volt Free Contacts

GSM Modem Kit

    • Remote Communications Solution for Insight3300/4100 (RC7D)

      Remote Communications Plug-In Module for InSight 3300/4100 - Ethernet interface

    • 
    Remote Communications Solution for Insight3300/4100

    • Remote Communications Solution for Insight5200 (RC7D2)

      Remote Communications Plug-In Module for InSight 5200 - Ethernet interface

    • 
    Remote Communications Solution for Insight5200

    • Remote Communications Solution for Insight3300/4100 (RC7E)

      Remote Communications Plug-In Module for InSight 3300/4100 - GSM/GPRS Wireless Remote Monitoring with antenna

    • 
    Remote Communications Solution for Insight3300/4100

    • Remote Communications Solution for Insight5200 (RC7E2)

      Remote Communications Plug-In Module for InSight 5200 - GSM/GPRS Wireless Remote Monitoring with antenna

    • 
    Remote Communications Solution for Insight5200

    • Remote Communications Solution for Insight3300/4100 (RC7F)

      Remote Communications Plug-In Module for InSight3300/4100 to support RS232 and RS485 modbus RTU interfaces

    • 
    Remote Communications Solution for Insight3300/4100

    • Remote Communications Solution for Insight6000S (RC6)

      Remote Communication Solution for InSight6000s. Alarm annunciation, SMS / Email / SNMP, 'remote control & data logging. Internet access of controller possible over Ethernet LAN / GPRS. Includes DPC Kit, SMA Quadband Antenna.

    • 
    Remote Communications Solution for Insight6000S

Automatic Load Transfer Panels

    • Automatic Transfer Systems (ATS) (ATS)

      To provide automatic control of your standby generating set in the event of a power outage. Available from 40A - 4000Amp.

    • 
    Automatic Transfer Systems (ATS)

Sound Attenuated Enclosures

    • Sound Attenuated Enclosure (CAESQ)

      Fully galvanised steel enclosure delivering durability and security for your generating set.

    • 
    Sound Attenuated Enclosure

Engine

    • Electronic Governor (EG1)

      Accurately controls the engine speed. Recommended for synchronising. Standard on some models - Refer to factory.

    • 
    Electronic Governor

    • Electronic Governor Programming Kit (GCK1)

      Used to program or monitor the Woodward L series governor

    • 
    Electronic Governor Programming Kit

    • Coolant Heater (WH1)

      Helps the engine to start in cold weather.

    • 
    Coolant Heater

    • Lube Oil Drain Pump (LP1)

      Assists in the removal of lubricant during service or maintenance.

    • 
    Lube Oil Drain Pump

Alternator

    • Anti-condensation Heater (AH1)

      Appropriate when the generating set is to be sited in a low ambient and/or high humidity environment, the heater maintains the air around the windings at a suitable temperature to prevent winding corrosion due to condensation.

    • 
    Anti-condensation Heater

    • Permanent Magnet Generator (AR3)

      High overload ability for motor starting.

    • 
    Permanent Magnet Generator

    • Programming Interface Kit (AP1)

      Used to adjust setting on MeccAlte automatic voltage regulator.

    • 
    Programming Interface Kit

    • Upgrade AVR from 1-phase to 3-phase Sensing (AR7)

      More accurate voltage regulation with unbalanced loads.

    • 
    Upgrade AVR from 1-phase to 3-phase Sensing

    • Total Plus Winding Protection (AWP1)

      This is the ultimate solution to be used when the application or the environment is abusing the insulation of the generating set. Also includes an overcoating of all the rotating active components.

    • 
    Total Plus Winding Protection

    • Upgrade Drive End Inlet from IP21 to IP23 Protection (AIP3)

      Improved protection against moisture ingress.

    • 
    Upgrade Drive End Inlet from IP21 to IP23 Protection

    • Newage Stamford Alternator (SAA)

      Change standard alternator to Newage Stamford alternator.

    • 
    Newage Stamford Alternator

Radiator

    • Transition Mounting Flange (WT1)

      Open sets only. Allows ease of fitting of transition during room installation.

    • 
    Transition Mounting Flange

    • Weather Louvre (WW1)

      Open sets only. To prevent water and dust ingress in conjunction with sound attenuator. (Room installations.)

    • 
    Weather Louvre

    • Low Ambient Coolant Solution (WA2)

      Coolant solution for ambients down to -36degC. 50% antifreeze.

    • 
    Low Ambient Coolant Solution

    • Low Coolant Temperature Alarm (WC1)

      Automatic low coolant temperature alarm at pre-set temperature level. Not available with InSight3000

    • 
    Low Coolant Temperature Alarm

    • Approaching High Coolant Temperature Alarm (WC2)

      Automatic high coolant temperature alarm at pre-set temperature level. Available with InSight4000/6000 only

    • 
    Approaching High Coolant Temperature Alarm

    • Low Coolant Level Alarm (WS1)

      Automatic low coolant level alarm at pre-set low level measurement. Not available with InSight3000.

    • 
    Low Coolant Level Alarm

Baseframe/ Handling

    • Bunded Fuel Base Tank (BT1)

      Secondary containment of fuel for leakage prevention.

    • 
    Bunded Fuel Base Tank

    • Bunded Base Tank with Leak Detection

      Automatic alarm upon detection of fluid in bund.

    • 
    Bunded Base Tank with Leak Detection

    • Single Point Lift (BL1)

      Eye hook fitted to top centre of canopy. Provides means of lifting generating set and is useful during installation. Available with canopied models only. Please refer to factory for use on trailer mounted generating sets.

    • 
    Single Point Lift

    • Captive Anti-Vibration Mounts (AV1)

      Required for mobile generator applications.

    • 
    Captive Anti-Vibration Mounts

Fuel

    • Fuel Tank Level Gauge

      Visual fuel level to help monitor fuel.

    • 
    Fuel Tank Level Gauge

    • Fire Valve Kit (FV1)

      In the event of a fire, the fuel supply is cut off from the machine and a signal is sent to the controller to stop the machine.

    • 
    Fire Valve Kit

    • Low Fuel Level Alarm (FL1)

      Automatic alarm for approaching low fuel level.

    • 
    Low Fuel Level Alarm

    • Low Fuel Level Shutdown (FL2)

      Automatic shutdown upon low fuel level detection.

    • 
    Low Fuel Level Shutdown

    • Analogue Fuel Level Measurement (FM1)

      Visual fuel level % display on controller. Not available with InSight3000.

    • 
    Analogue Fuel Level Measurement

    • Four Position Fuel Level Switch (FP4)

      Gives fuel level indication at 4 set levels.

    • 
    Four Position Fuel Level Switch

    • 3 Way Dual Valve (BPV)

      Complete with single lever operation. This should be used for remote fuel connection selection instead of basetank. Manual change over between two fuel sources to the engine.

    • 
    3 Way Dual Valve

    • Manual Fuel Transfer Pump (MFP)

      Manually operated fuel transfer pump, comes complete with hose.

    • 
    Manual Fuel Transfer Pump

    • Automatic Fuel Transfer System (FT1)

      Automatic fuel transfer pump, activated at a set generator fuel tank level. The system includes a level switch, a motorised valve, and pump. Also includes upgrade to metal fuel tank.

    • 
    Automatic Fuel Transfer System

Exhaust

    • Industrial Silencer Mounting Kit (MK1 )

      Essential kit for mounting an industrial silencer during installation. This kit is supplied loose and includes 2 x cuffed elbows, 2 x support brackets, 6 x clamps and 1 x rain cap.

    • 
    Industrial Silencer Mounting Kit

    • Residential Silencer (ES1)

      Provides additional exhaust noise reduction. Supplied loose. (Standard on all canopied sets)

    • 
    Residential Silencer

    • Residential Silencer Mounting Kit (MK2)

      Essential kit for mounting a residential silencer during installation. This kit is supplied loose and includes 2 x cuffed elbows, 2 x support brackets, 6 x clamps and 1 x rain cap.

    • 
    Residential Silencer Mounting Kit

    • Stainless Steel Bellows (EB1)

      Provide flexible connection between engine and exhaust. Supplied loose. Required for open sets only.

    • 
    Stainless Steel Bellows

AC Power Out (3 Phase)

    • 4 pole Circuit Breaker (CB4)

      This is an upgrade from the standard 3 pole circuit breaker. The neutral connection is broken as well as L1, L2 and L3. (3 phase only)

    • 
    4 pole Circuit Breaker

    • Auxiliary Contact in Circuit Breaker (AUX1)

      Provides the controller with an indication on the current circuit breaker position.

    • 
    Auxiliary Contact in Circuit Breaker

    • Motorised Kit for Circuit Breaker (MOT1)

      Enables the automatic operation of the circuit breaker throught external signals. i.e. open and close signals from the genset controller.

    • 
    Motorised Kit for Circuit Breaker

    • Earth Leakage Protection (EL2)

      Provides protection for the main output breaker, complete with shunt trip. Detects unbalanced current between the phases of the machine and the neutral, resulting in the circuit breaker tripping open and the machine being shutdown

    • 
    Earth Leakage Protection

    • Earth Leakage Protection (EL3)

      Earth Leakages for Main Output circuit breaker only available on LSIG ABB breaker

    • 
    Earth Leakage Protection

Battery

    • Battery Isolator Switch (BI1)

      A lever is placed directly after the battery which is used to isolate the batteries from the machine.

    • 
    Battery Isolator Switch

    • Battery Charger (BC1)

      Keeps the genset starting batteries full of charge when the machine is not running. Includes BC failure. 5A 220/240 Volt.

    • 
    Battery Charger

    • Battery Charger including Boost (BC2)

      Keeps the genset starting batteries full of charge when the machine is not running. Includes BC failure and boost. 220/240 Volt.

    • 
    Battery Charger including Boost

Other Accessories

    • Sound Attenuated Container (CEC)

      Increased sound attenuation with container option. Bespoke containers available throughout the range.

    • 
    Sound Attenuated Container

    • Tool Kit (TK1)

      Basic maintenance tools.

    • 
    Tool Kit

    • CE Certification - Open Sets (CE1)

      Additional guarding on exhaust manafolds. Certificate of compliance. Europe Only

    • 
    CE Certification - Open Sets

    • CE Certification - Canopied Sets (CE2)

      Certificate of compliance Europe Only

    • 
    CE Certification - Canopied Sets

    • UKNI/CE2 (UKNI 2)

      Certificate of compliance UK ONLY

    • 
    UKNI/CE2

    • UKNI/CE 1 (UKNI 1)

      Certificate of compliance UK ONLY

    • 
    UKNI/CE 1

    • Additional Operators Manual (OM1)

      Additional operator manuals for workshop/service personnel.

    • 
    Additional Operators Manual

Interested in this product? Get in touch

Make an enquiry

This website uses cookies to improve your experience while you navigate through the website. View our cookies to find out more.